Arcam Alpha 7SE Buku Pegangan - Halaman 5

Jelajahi secara online atau unduh pdf Buku Pegangan untuk Pemutar CD Arcam Alpha 7SE. Arcam Alpha 7SE 8 halaman. Arcam cd player handbook
Juga untuk Arcam Alpha 7SE: Buku Pegangan (8 halaman), Buku Pegangan (8 halaman)

Halaman Cetak

Using the remote control

The buttons shown in white have

the same functions as those on the

front of the CD player.

Don't forget to fit'the batteries and ensure they

are inserted correctly into the back of the

remote control before using it

The remote control sends a message to an infra¬

red receiver which is located behind the ARCAM

badge on the front of the CD player

Do not place anything in front of the badge or

the remote control may not work.

SPACE

This button automatically inserts a 4 second space between tracks in either normal or

programmed play (see PROG). This enables the music search system of certain cassette

decks to operate correctly when making recordings. The 'SPACE' indicator on the display

is illuminated. Press the SPACE button a second time to cancel this function. The 4

second space is ignored when you use any of the search keys. NOTE:The 4 second time

between tracks is added to the remaining and total time display for the disc e.g. an I I

track disc will have 40 seconds added to its total track time when using the 'SPACE'

function. When the CD is between tracks the displayed time will count from -0.04 to 0.00

in one second increments and the 'SPACE' legend will flash,before the track begins to play.

CLEAR

If you make a mistake whilst programming

you can delete the last track you

programmed in by pressing the 'CLEAR'

button. To delete a track from the middle

of a programmed selection press 'CHECK'

until you get to the track you wish to

delete. Then press 'CLEAR'. To delete all

the programmed tracks press the 'STOP'

key twice or continually press 'CLEAR' until

'0' is displayed.

0-9 KEYPAD

Allows direct access to individual tracks on

the disc.

To select a track, press the corresponding

keypad button then press 'PLAY'. For tracks

greater than 9 just enter the appropriate

numbers, ie for track 15 press I, then 5,

then 'PLAY'.

REMAIN

Press once to display the remaining time of

the track. Press a second time to display

the remaining time of the disc. Press

'REMAIN' a third time and the display will

revert to its original setting showing the

elapsed time of the track. If you press

'REMAIN' when the disc is not playing the

total number of tracks and total playing

time is displayed.

MUTE

Stops sound to the speaker outputs of

certain Arcam amplifiers.

Please note:The 'VOLUME' control and

'MUTE' buttons have no effect on the audio

output level of the Alpha CD players.

VOLUME + -

Adjusts the volume level on Arcam remote

controllable amplifiers.

Please note:The 'VOLUME' control and

'MUTE' buttons have no effect on the audio

output level of the Alpha CD players.

A-B

This button enables you to repeat any

section of music within one track. Whilst

the disc is playing press the 'A-B' button at

the start of the section that you wish to

repeat. 'REPEAT' is illuminated on the

display and the 'A -' letter flashes. Press the

A-B button a second time when you reach

the end of the section you wish to repeat.

The 'A-B' letters stop flashing and remain lit

The selected section of track will play

repeatedly until you press the 'STOP' or H

or H • The backward

and forward

►► search buttons can move back or for¬

ward within the selected section.

SHUFFLE

Press 'SHUFFLE' and then 'PLAY' to play all

the tracks on the disc in random order

Press 'SHUFFLE' during play and shuffle play

will begin from the current selection.

'SHUFFLE' will illuminate in the display.

While the player is deciding which track to

play the track indicator on the display will

perform a scrolling routine. In 'SHUFFLE'

mode the H button will only replay the

current track, and not select the previous

track. To stop the shuffle function press

'SHUFFLE' a second time.

SCAN

Press to play the first 10 seconds of each

track in sequence. The track number will be

indicated on the display while 'SCAN' is

selected. To continue listening to a 'scanned'

track, press 'PLAY'. The player will leave the

'SCAN' mode once 'PLAY' has been

pressed.