Arcam SOLO MINI Buku Pegangan - Halaman 12
Jelajahi secara online atau unduh pdf Buku Pegangan untuk Konverter Media Arcam SOLO MINI. Arcam SOLO MINI 18 halaman. Music system
Juga untuk Arcam SOLO MINI: Brosur (2 halaman), Buku Pegangan (20 halaman)
Halaman Cetak
playing
sounds
Playing a CD
With Solo Mini switched on (blue light showing),
gently insert a CD (label-side up) into the disc slot on
the front panel. Allow the disc to be drawn in by the
motorised rollers.
If 'CD AutoPlay' is enabled, the CD plays immediately; if
disabled, the CD waits for a command from the remote
or top panel. ('CD AutoPlay' is set in the system menu
– see page 16.)
In addition to audio CDs, Solo Mini can play MP3
and WMA audio files on a CD-R or CD-RW.
Basic operation
Press
4
/
;
(remote:
4
) to start playback.
<
To directly access a track, press the track number
<
on the numeric keypad of the remote.
Press
4
/
;
on the top panel or
;
on the remote
<
control to pause playback. To resume playback,
press
4
/
;
on the top panel or
4
on the handset.
Press the
<
/
1
button on the top panel or
<
the remote control to stop playback.
To eject a disc, press
1
on the remote control,
<
<
1
or press the
/
button on the top panel.
Skipping tracks
To skip a track forwards or back, press
/
or
0
.
When skipping back, the first button press takes you to
the beginning of the current track. Pressing the button
again takes you to the start of the previous track.
Repeat and Shuffle play
To change the play mode, use the
button on the
MODE
remote control.
Press
again to cycle through the various repeat
MODE
and shuffle options.
CD Play modes
Default play mode.
CD
Disc tracks are played back in sequential
order.
Repeat disc.
Rpt Disc
All tracks on the CD are played in
order. After the last track has finished,
playback restarts from the first track.
Repeat track.
Rpt Trk
Playback of the current track is
repeated until cancelled.
Shuffle all.
Shuffle
The tracks on the CD are played in a
random order.
Repeat shuffle.
Rpt Shuf
<
on
All the tracks on the CD are played in
a random order. After every track on
the CD has been played once, playback
restarts from the first track.
12
Listening to radio
Switching on the radio
Press the
or
/
button on the remote-control
FM
DAB
AM
to cycle between tuner inputs.
Alternatively, press
until the radio type that
SOURCE
you wish to listen to (DAB, FM or AM) is displayed on
the front panel.
Tune mode and Preset mode
The
button toggles between the two ways of
MODE
selecting a station: Tune mode and Preset mode.
In Tune mode, you can step through the frequency of
the FM or AM band, either manually or automatically
(see below) using the
B
or
C
buttons on the
remote control. Found DAB stations are cycled through
in sequence in Tune mode.
In Preset mode, you can cycle through stations that
have been saved as presets, either sequentially (using
the
B
or
C
buttons on the remote control, or
/
on the top panel); press
to confirm in each case.
OK
Or you can go straight to a particular preset station by
pressing its number key on the remote.
Setting station presets
Solo Mini provides for 30 FM station presets, 30 AM
station presets and 10 DAB station presets.
To store a preset, first tune to the radio station you
wish to store. To store the station into one of the
presets 1–9, press and hold the appropriately numbered
button on the remote control until the 'Saved to Preset
nn' message is displayed.
An alternative method, giving access to presets 10–30,
is to press
to enter the system menu (see page
MENU
16). Navigate through the menu until 'Store Preset' is
{
}
displayed. At this point, use the
and
buttons on
the remote control (
0
or
/
on the top panel) to select
the preset number you wish to use for the currently
tuned station. Press
to confirm and the 'Saved to
OK
Preset nn' message is displayed.
Note that saving a radio station into an already
occupied preset will cause it to be overwritten by the
new one.
Your presets are retained when Solo Mini is
disconnected from the power supply.
0
or