Circe Cycles Helios Panduan Perakitan - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Sepeda Circe Cycles Helios. Circe Cycles Helios 8 halaman. Separable tandem
Juga untuk Circe Cycles Helios: Panduan Pengguna (12 halaman), Panduan Pemilik (15 halaman)

Halaman Cetak

INTRODUCTION

This manual is intended for those who have bought

their Helios, STEPS Helios or Triplet directly from Circe

Cycles and have received their tandem, or triplet,

packed in a box. This manual is to help you unpack

and assemble your tandem or triplet. After this

you can refer to the Owner's manual to help with

adjustment and more comprehensive setup.

To further help with assembling your tandem, there

are instructional videos available on the manuals

page of our website.

www.circecycles.com/products/helios/manuals/

UNPACKING

Make sure the box is the correct way up before

opening. Remove all the loose packaging and

any loose parts from around the bike. Remove

the tandem from the box, a second set of hands

makes this easier.

The triplet section comes in a separate box,

please follow the same procedure as above for

unpacking.

NOTE - Check that everything is present and

undamaged before proceeding to assembly.

CONTENTS OF MAIN BOX

The main box should contain:

• The bike with front wheel, stoker and captain's

handlebars, stems, steerer extender and pedals

(if included) removed.

• Racks and stand if ordered, these should be

fitted to the bike.

• Front (removed) and rear mudguard

• Thru axle for front wheel, installed in fork

• Battery (STEPS only)

• Small parts box (contents listed below)

CONTENTS OF SMALL PARTS BOX

The small parts box should contain the following,

however there may be additional parts in the box

depending on what has been ordered:

• Reflectors and bell

• Steerer extender and stem (only extender

STEPS)

• Bag of manuals.

• Orange pad spacer (hydraulic).

• Head unit, keys and Di2 tool (STEPS).

• Charger, power cable and adaptor (STEPS)

CONTENTS OF TRIPLET BOX

Triplet box should contain:

• Main triplet section

• Seat post, shim and saddle

• Both timing chains

• Rear stoker handlebar and stem

• Velcro straps

ASSEMBLY

Find plenty of space to lay out the parts and

gather the tools you will need. With the Triplet it is

beneficial to have a second person to help with

assembly.

NOTE - Only cut clear zip ties when unpacking.

TOOLS REQUIRED

• 4,5 and 6mm Allen key

• Torque wrench (Triplet) Optional

• Cable cutters or robust scissors for cutting zip

ties

CirceCycles.com