DigiCare DIGISOL DG-GR1310 Panduan Instalasi Cepat - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Router Nirkabel DigiCare DIGISOL DG-GR1310. DigiCare DIGISOL DG-GR1310 17 halaman. Gepon onu 300mbps wi-fi router with 1 pon and 1 giga port

Halaman Cetak

Troubleshooting

1. After power all the lights are lit?

Reasons:

1) Power connection errors

2) Power is not normal.

Solution:

1) Check that the power cable is connected

2) The rear panel of the power supply is turned on.

2. GE / FE led does not light?

Reasons:

1) Network cable is damaged or loose connection

2) Cable type error;

3) Long lines outside the allowable range.

Solution:

1) Replace the network cable, and pay attention to the standard

Ethernet cable must be parallel or crossing lines.

3. After working for some time to stop working?

Reasons:

1) Power supply is not working properly

2) The equipment from overheating.

Solution:

1) Check if there is contact with abnormal voltage is too high or too low;

2) Check the ambient conditions, vents are normal ventilation.

4. LOS led flashes?

Reasons:

1) Fiber failure;

2) Central office equipment failure.

Solution:

1) Inspect fiber is connected properly, is connected to the correct

connector, optical power is normal.

2) Contact your operator.

5. PON led flashes?

Reasons:

1) Fiber optic connector is loose;

2) Central office equipment failure;

3) Fiber optic connectors are dust.

Solution:

1) Inspect fiber is connected properly;

2) Cotton ball with alcohol swabbing fiber optic connectors;

3) Contact your operator.