Digichain WP6K Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Papan tombol Digichain WP6K. Digichain WP6K 20 halaman. Wallplate control keypad 6-program buttons to send ip&rs232 commands to control third-party devices

Halaman Cetak

Programmable Control Panel

Please select the connection type (Serial), and then select the COM port. The speed

should be set as 57600.

Configuration Procedure:

① Type any key, and then press "Enter" on keyboard , the main menu will be shown

as below:

There are 6 menu can be chosen: [1] Key Function Set; [2] Network Set; [3] Address of

Main Unit Set; [4] Display Current State; [5] Set to Default Para; [6] Reset.

② Type "1~6" to select the corresponding menu, and then and then click "send" by

mouse or press "Enter" on keyboard to enter next menu. Here we type "1" for

example.

③ Repeat the step 2 to enter the next menu to finish the configuration.

Digichain Electronics