Epson 1160 CFS Panduan Petunjuk Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Printer Epson 1160 CFS. Epson 1160 CFS 12 halaman.

9. Set up the ink bottles

Put the tops that have the holes in them, on the 4 oz bottles of ink. Put the ink

bottles in the acrylic tray as shown in the above photo. Check to verify that there

is a vent hole in each of the tops to let air into the bottles. If any of the vent holes

are missing, you will have to make one using a 1/16 diameter drill.

10. Insert the tubes into the bottles

Set up the bottle tray next to the right hand side of the printer. Trim the tubing

length so that the tubes will make a turn into the bottle with out rising up. There

must be 3 ¾ inch of tubing inside the bottle. The bottles are arranged in order K-C,

M-Y from front to back. You just want to have a neat orderly tube arrangement.

After you cut the tubes to length, use a black marker and make a mark on each

tube 3 ¾ inch from the end of the tube. Insert the tubes through the larger hole in

the center of the cap until the black mark is just inside the cap. Don't cut the

tubes too short.

It is

very important

cartridges will be ruined. Check the label on the CFS cartridge and trace down the

S a v e

M o n e y

MIS Associates Inc

http://www.inksupply.com

to get the right tube into the right color bottle or the

a n d

I m p r o v e

2901 Auburn Rd

Fax: 248-289-6013

Y o u r

Auburn Hills, MI 48326

P r i n t i n g

800-445-8296