Axxess AX-AM-VW91 Panduan Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Perekaman Axxess AX-AM-VW91. Axxess AX-AM-VW91 8 halaman. Volkswagen (with mib platform) hdmi and camera interface2014-up
Halaman Cetak
• If installing a front/rear camera, connect the Black wire labeled "GND",
to the camera(s) ground wire.
• If installing a backup camera, connect the Red wire labeled "Reverse Camera 12v",
to the backup camera power wire.
• If installing a front camera, connect the Red wire labeled "Front Camera 12v",
to the front camera power wire.
• The Red wire labeled "Acc Power Output" is optional if a power source is required
while a camera is active.
• If installing a backup camera, connect the RCA jack labeled "Reverse Camera Video Input"
to the camera.
• If installing a front camera, connect the RCA jack labeled "Front Camera Video Input"
to the camera.
• If adding an HDMI input to the factory radio, connect an HDMI cable (Axxess part number
AX-HDCABLE, sold separately), to the port on the AX-AM-VW91 labeled "HDMI IN".
2
CONNECTIONS TO BE MADE
(Connections Diagram)
AV IN
LVDS OUT
LVDS IN
HDMI
IN
POWER