Epson 2000P - Stylus Photo Color Inkjet Printer Setup Manual - Halaman 12

Jelajahi secara online atau unduh pdf Setup Manual untuk Printer Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 17 halaman. Product support bulletin(s)
Juga untuk Epson 2000P - Stylus Photo Color Inkjet Printer: Penggantian Kartrid (2 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Spesifikasi (1 halaman), Informasi Produk (13 halaman), Panduan Pengguna (12 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (2 halaman), Buletin Dukungan Produk (4 halaman), Buletin Dukungan Produk (7 halaman), Panduan Memulai Cepat (2 halaman), Panduan Petunjuk Instalasi (8 halaman)

Caution:

5. Align the tabs on each ink cartridge so that they are resting on the

tabs protruding from the base of the opened ink cartridge clamps.

Do not apply excessive force to the cartridges.

You must remove the yellow tape seals from the cartridges

before installing them; otherwise, the cartridges will become

unusable and you will be unable to print.

If you have installed an ink cartridge without removing the

yellow tape seal, you must remove the cartridge and install a

new one. Prepare the new cartridge by removing the yellow tape

seal, then install it in the printer.

Do not remove the EPSON label from the cartridges; otherwise,

the cartridges may become clogged and unable to print.

Do not remove the tape seals from the bottom of the cartridges;

otherwise, ink will leak.

Do not remove the green IC chip from the side of the cartridge.

If you install ink cartridges without an IC chip, the printer may

be damaged.

Do not touch the green IC chip on the side of the cartridge.

Doing so may prevent normal operation and printing.

Do not touch this part.