Axxess AXDSPL-HN1 Panduan Petunjuk Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Perekaman Axxess AXDSPL-HN1. Axxess AXDSPL-HN1 16 halaman. Acura dsp interface with pre-wired harness 2009-2014

Axxess AXDSPL-HN1 Panduan Petunjuk Instalasi
Crossover Adjust
• Select the desired crossover filter per channel, low pass, band pass, or high pass.
• Select the desired crossover slope per channel, 12db, 24db, 36db, or 48db.
• Select the desired crossover frequency per channel, 20hz to 20khz.
Note: The front and rear channels default to a 100Hz high pass filter to keep the low frequency
signals out. If a subwoofer is not being installed, change the front and rear crossover points down
to 20Hz for a full range signal, or to the lowest frequency the speakers will play down to.
MOBILE APP
(CONT.)
Continued on the next page
REV. 11/3/2020 INSTAXDSPL-HN1
11