Axxess AXTC-FD2 Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Peralatan Perekaman Axxess AXTC-FD2. Axxess AXTC-FD2 4 halaman. Ford swc (steering wheelcontrol) nd data interface 2012-2016

Halaman Cetak
1.
Open the driver's door, and keep open during the programming process.
2.
Cycle the ignition on and wait 5 seconds, or until the factory display
screens reads LINE IN.
3.
Connect the AXTC-FD2 harness to the AXTC-FD2 interface, and then to
the wiring harness in the vehicle.
4.
Tap Volume Up
Locate the Volume Up button on the steering wheel. Program the
interface by tapping the Volume Up button at a heartbeat pace until the
VOL
+
LED light stops flashing.
5.
The LED light will flash Green & Red while the interface programs the radio
to the steering wheel controls. Once programmed, the LED light will go
out, then produce a pattern which will identify the radio type installed.
Green & Red LED
Green or Red LED
PROGRAMMING
6.
Green & Red LED
Green LED
7.
8.
The LED light will go out, then once again quickly flash Green & Red
while the interface programs itself to the vehicle. Once programmed,
the LED light will go out again, then turn solid Green.
Cycle the ignition off, then back on.
Test all functions of the installation for proper operation.
REV. 7/30/2019 INSTAXTC-FD2
3