Axxess AXTC-VW1 Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Peralatan Perekaman Axxess AXTC-VW1. Axxess AXTC-VW1 4 halaman. Volkswagen swc (steering wheelcontrol) and datainterface2002-2017

Halaman Cetak

If the interface fails to function,

press and release the reset button,

then repeat the programming

process from step 4 to try again.

LED

Reset

Light

Button

QR Code Scan Here

Further troubleshooting steps and information

can be located at:

axxessinterfaces.com/product/AXTC-VW1

AxxessInterfaces.com

TROUBLESHOOTING

At the end of programming the LED light will turn

indicates programming was successful. If the LED light didn't turn

Solid

Green, reference the list below to understand which programming

section the problem may stem from.

LED Light

Solid Green

Slow Red Flash

Slow Green Flash

Solid Red

Note: If the LED light shows

everything programmed correctly), yet the steering wheel

controls don't work, check to ensure that the 3.5mm jack is

plugged in, and also plugged into the correct jack on the radio.

Once corrected, press the reset button, then program again.

Final LED Feedback

Solid Green

which

Radio

Vehicle

Programming

Section

Pass

Fail

Pass

Fail

Solid Green

for Pass (indicating

AXTC-VW1

I N S T A L L A T I O N I N S T R U C T I O N S

Having difficulties? We're here to help.

Contact our Tech Support line at:

386-257-1187

Or via email at:

[email protected]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

NOWLEDGE IS

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

REV. 7/30/19 INSTAXTC-VW1

OWER