Axxess ABTI-GM4 Panduan Petunjuk Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Elektronik Mobil Axxess ABTI-GM4. Axxess ABTI-GM4 8 halaman. Gm lan interface for handsfree bluetooth car kits

Halaman Cetak

8) Connect the white 8 pin plug on the IHF-1000 cable to the ABTI-GM4 power cable, and con-

nect the other end of the power cable to the ABTI-GM4 module.

9) Install the IHF-1000 keypad on the dashboard of the vehicle, and route the wire to the IHF-

1000 harness. Attach the keypad connector to the harness.

10) Install the IHF-1000 microphone in an appropriate location (see IHF-1000 instructions), route

the wire to the IHF-1000 harness, and attach the microphone connector to the harness.

11) Secure all components, and reinstall the radio.

12) Reconnect the vehicle battery.

OPERATION

Refer to the Motorola IHF1000 manual for operation. Adjust the volume of the handsfree kit by

turning the volume knob of the radio. Audio from any source will be muted when a call comes

in or a call is made.

INSTALLING THE ABTI-GM4 WITH PARROT

HANDSFREE CAR KITS

*Note: The ISO to 8 way connector harness will be used in this application.

*Note: The 8 way to 8 way connector harness will NOT be used in this application.

Compatible Parrot kits: CK3000, CK3000 Evolution, CK3100, CK3300, CK3500, 3200LS,

3400LS-GPS, MK6000, MK6100

(Installation will be the same as the Motorola Handsfree kit steps 1-7)

8) Plug the 8 way side of the ISO into the 8 way connector on the ABTI-GM4.

ABTI-GM4

FROM CAR

IHF-1000 keypad

ABTI-GM4

White

8 pin

plug