Epson 3880 - Stylus Pro Color Inkjet Printer Manual Jaringan - Halaman 29

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Printer Epson 3880 - Stylus Pro Color Inkjet Printer. Epson 3880 - Stylus Pro Color Inkjet Printer 38 halaman. Printer
Juga untuk Epson 3880 - Stylus Pro Color Inkjet Printer: Brosur (3 halaman), Spesifikasi (2 halaman), Manual Jaringan (39 halaman), Brosur & Spesifikasi (8 halaman), Mulai di sini (2 halaman), Mulai dari Sini Manual (6 halaman), Garansi Terbatas (12 halaman), Panduan Manajemen Warna (47 halaman), Brosur & Spesifikasi (8 halaman), Panduan Memulai Cepat (2 halaman)

Configuring the Network Interface Using EpsonNet Config

with a Web Browser

After you have assigned an IP address to the network interface using the

printer's control panel, EpsonNet Config, or a DHCP server, you can configure

the network interface using EpsonNet Config with Web Browser.

Note:

❏ A Web browser must be installed on your computer.

❏ TCP/IP must be correctly set for the computer and the network interface.

Follow the steps below to change the IP address using EpsonNet Config.

1. Turn on your printer.

2. Run EpsonNet Config in one of the following ways:

❏ Run EpsonNet Config. Select the printer you want to configure from the

list and then click Launch Browser.

❏ Open your browser, and then type in the IP address of the network

interface directly.

http://IP address of network interface/

Example: http://192.168.100.201/

Note:

To check the IP address of the network interface, use EpsonNet Config. See

"About EpsonNet Config" on page 26 for Windows users, or see "About EpsonNet

Config" on page 27 for Macintosh users for details.You can also print a Network

Status Sheet from the printer's control panel. See "Printing a Network Status

Sheet" on page 19 for instructions.

3. Click TCP/IP under Network on the Configuration menu to display the

TCP/IP setting screen.

4. Select a method for acquiring the IP address. When you select Auto,

DHCP becomes available and assigns an IP address automatically. If you

want to set the IP address manually, select Manual (recommended).

Note:

❏ The network administrator must check any changes made to the IP address

settings.

Network Software