Epson 4000 - Stylus Pro Color Inkjet Printer Informasi Produk - Halaman 10

Jelajahi secara online atau unduh pdf Informasi Produk untuk Printer Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 13 halaman. Print engine
Juga untuk Epson 4000 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (4 halaman), Panduan Referensi Produk (38 halaman), Mulai dari Sini Manual (6 halaman), Buletin Dukungan Produk (17 halaman), Informasi Penting (2 halaman), Garansi Terbatas (12 halaman), Panduan Referensi Cepat (11 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman)

Epson Stylus Pro 4000

11. When done, press the

alignment mode.

If you want to verify or fine-tune the automatic alignment

process, you can perform a manual head alignment. See your

electronic Reference Guide for instructions.

Replacing the Cutter Blade

If you notice that your paper isn't cut cleanly, the cutter blade

may need to be replaced. For a list of media that do not work

with the cutter, see the Printer Guide.

Make sure that the printer is on and the front cover is closed.

1. Press the Menu

2. Press

until you see MAINTENANCE, then press

again. You see CUTTER REPL.

3. Press Menu

to display EXEC.

4. Press Menu

again. The print head moves to the

replacement position. OPEN TOP COVER is displayed.

5. Open the top cover.

10 - Epson Stylus Pro 4000

Pause button to exit the head

7. When REPLACE CUTTER is displayed on the LCD, hold

down the side pin as shown and turn the latch to the right.

8. Release the side pin and carefully remove the cutter blade.

WARNING: The blade is sharp. Be careful when removing it.

9. Insert the new cutter as shown.

4/04