Epson 4000 - Stylus Pro Color Inkjet Printer Panduan Referensi Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Printer Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 11 halaman. Print engine
Juga untuk Epson 4000 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (4 halaman), Panduan Referensi Produk (38 halaman), Informasi Produk (13 halaman), Mulai dari Sini Manual (6 halaman), Buletin Dukungan Produk (17 halaman), Informasi Penting (2 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman)

Halaman Cetak
Epson 4000 - Stylus Pro Color Inkjet Printer Panduan Referensi Cepat

Control Panel Messages

Control Panel Messages

Status messages

These messages indicate normal phases of printer operation.
Message
READY
PRINTING
RESET
PRESS PAUSE BUTTON
PLEASE WAIT
PAUSE
CUTTING
CHARGING INK

Error messages

For a complete list of error messages, see your Printer Guide.
Message
INK LOW
INK LOW
CHANGE PAPER
TYPE
LOAD PAPER
SET PAPER LEVER
RELOAD PAPER
MNT TNK FULL
Light
Pause light off
Pause light flashing
All lights flash briefly
Pause light on
Pause light flashing
Pause light on
Explanation
Light
Ink cartridge(s) are nearly
Ink light flashing
empty (printing continues).
Ink light on
Ink cartridge(s) are empty
(printing stops).
The paper source setting in
Paper light on
print options is different
from the control panel setting.
Paper light on
The paper lever is in the
released position.
Paper light on
The printer cannot detect
the paper.
Ink light on
The maintenance tank is full.
Explanation or response
Printer is ready to print.
Printer is receiving data.
Printer is resetting.
Press the Pause button to continue.
Printer is initializing or performing maintenance. Wait
until READY appears.
Printer is paused. To resume printing, press the
Pause button.
Printer is cutting the paper.
Printer is charging the ink delivery system. Wait until
until READY appears.
Response
Replace ink cartridge(s) indicated
on LCD. See page 5.
Replace ink cartridge(s) indicated
on LCD. See page 5.
Make sure the right paper is loaded
and the paper source setting is the
same on the control panel and print
options.
Move the paper lever to the
secured position.
Make sure paper is loaded correctly
and the paper lever is secured. If
you're using cut sheets, make sure
the paper is flat.
Replace the maintenance tank. See
page 7.
8
Continue