Axxess AXDSPX-HK4 Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Elektronik Mobil Axxess AXDSPX-HK4. Axxess AXDSPX-HK4 4 halaman.

1. Locate the factory amp, unplug all connectors, then remove the amp.

Note: Amp location is on the following page.

2. Install the AXDSPX-HK4 harness and make all necessary connections, but leave the amp

turn-on wire disconnected.

3. Plug the 16-pin and 20-pin connectors from the AXDSPX-HK4 harness into the AXDSP-X.

4. Download and install the AXDSP-X app from the Google Play Store or Apple App Store.

5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the

mobile device to the AXDSP-X. (Figure A)

6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button

to save the configuration. (Figure B)

7. Connect the amp turn-on wire from the AXDSPX-HK4 harness. Click the Identify button to

confirm that the AXDSPX-HK4 is connected properly. If so, a chime will be heard from the

front left speaker. Test all functions of the installation for proper operation.

Note: The outputs may need to be configured within the Outputs tab.

8. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup

Instructions tab, or online at

Axxessinterfaces.com

INSTALLATION

for an explanation of each tab in the app.

Continued on the next page

(Figure A)

(Figure B)

REV. 1/30/2020 INSTAXDSPX-HK4