Epson 7800 - Stylus Pro Color Inkjet Printer Manual Pembongkaran dan Pengaturan - Halaman 13

Jelajahi secara online atau unduh pdf Manual Pembongkaran dan Pengaturan untuk Printer Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 halaman. Stylus pro 800 series
Juga untuk Epson 7800 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (8 halaman), Spesifikasi (4 halaman), Panduan Memulai (10 halaman), Panduan Pengguna (11 halaman), Panduan Referensi Cepat (12 halaman), Panduan Tambahan (1 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (8 halaman), Buletin Dukungan Produk (10 halaman), Brosur & Spesifikasi (16 halaman), Lembar Pemberitahuan (4 halaman)

3. Lift the box up and away from the printer.

Remove all the items from the hollow (A and

B) on the rear side of the printer.

Note:

The ink cartridges included with your printer are

primarily for initial setup.

4. Remove the polystyrene foam stoppers under

the printer.

5. Remove the protective materials:

❏ from the front cover (tape).

❏ from the ink compartment cover (tape).

❏ from the maintenance tank (tape).

❏ from the side of the print head

compartment (screw and metal plate

inside the front cover).

Note:

Do not re-install the screw. Store it separately to

avoid losing it.

Using the Stand

Checking the contents of the package

Before assembling the Stand, check the contents of

the package to make sure that all of the items

shown are included, and are not damaged.

Parts:

Right base (1) and Left base (1)

Right leg (1) and Left leg (1)

Bottom horizontal strut (1)

Top horizontal strut (1)

Basket hooks (4)

Paper basket (1)

Tool:

Hex wrench (2)