Axxess AX-ALOC10 Petunjuk Instalasi

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Konverter Media Axxess AX-ALOC10. Axxess AX-ALOC10 2 halaman.

AX-ALOC10

INSTALLATION INSTRUCTIONS

The AX-ALOC10 should be installed on a stereo's speaker

output wires or the output wires on an OEM amplifier of up to 30

watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input

terminals on the OEM speakers. This device is most commonly

installed in the trunk when a subwoofer system is being added

to the OEM

stereo

system. Please refer to the wiring diagram

for the input connection details.

Wire Color & Function: The audio and power input wire colors

are an EIA standard for car stereo applications as follows.

INPUT HARNESS

WHITE = LEFT Front (+) Input

WHITE/BLACK = LEFT Front (-) Input

GRAY = RIGHT Front (+) Input

GRAY/BLACK = RIGHT Front (-) Input

BLACK = Reference Ground (-)

(REFERENCE GROUND OPTIONAL IF NOISE IS PRESENT)

NOTE: Be sure that all audio input connections are polarized or

in phase with each other. That is, the positive output wires from

the audio source need to be connected to the corresponding

positive input wires of the AX-ALOC10. The same goes for the

negative audio wires. Failure to do this will result in poor bass

response and low quality audio.