DigiDesign 96i I/O Manual - Halaman 17

Jelajahi secara online atau unduh pdf Manual untuk Aksesori DigiDesign 96i I/O. DigiDesign 96i I/O 20 halaman. 16-input, 2-output digital audio interface features 24-bit analog-to-digital (a/d) and digital-to-analog (d/a) converters
Juga untuk DigiDesign 96i I/O: Panduan Cepat (13 halaman), Manual (16 halaman)

Halaman Cetak

• For analog/digital input switching, see "En-

abling S/PDIF Digital Input for Channels 1

and 2" on page 13.

Hardware Setup controls for the 96i I/O

Adjusting 96i I/O Input

and Output Levels

Input Levels

The 96i I/O input levels are adjustable in

Pro Tools. Inputs 1–4 provide multi-level sensi-

tivity adjustment. Inputs 5–16 provide two se-

lectable settings. The available settings let the

96i I/O accommodate a variety of equipment

output levels.

To adjust input level sensitivity on the 96i I/O:

Connect instrument and other devices to the

96i I/O analog inputs.

In Pro Tools, choose Setups > Hardware.

Choose 96i I/O in the Peripherals list.

For Inputs 1–4, set the input trim slider to

match the output level of the connected instru-

ment. Choices range from –12 dBV to +4 dBu.

(Hardware inputs and outputs are muted when-

ever the Hardware Setup window is open. Check

your settings by closing the Hardware Setup

window and then playing the input source. Re-

turn to the Hardware Setup window if further

adjustments are needed.)

For each input or pair of inputs 5–16 being

used, select –8 dBV or +4 dBu as appropriate to

best match the output level of the connected de-

vices.

Click Done.

Output Levels

The 96i I/O analog outputs can operate at

–10 dBV or +4 dBu, as configured in the Hard-

ware Setup dialog.

Analog output is mirrored to S/PDIF outputs

1–2, making it easy to connect CD, DAT, and

other stereo digital recorders that support RCA

S/PDIF input.

To set Output operating level:

In the Hardware Setup dialog, choose the

96i I/O in the Peripherals list, then select

–10 dBV or +4 dBu, as desired.

Enabling S/PDIF Digital Input for

Channels 1 and 2

You can choose to use either the analog or digi-

tal inputs as sources for 96i I/O channels 1–2.

Only channels 1–2 can access the S/PDIF inputs.

To select analog or digital input for channels 1–2:

Choose Setups > Hardware.

Choose 96i I/O in the Peripherals list.

Click to set Ch 1–2 Input to Analog or S/PDIF,

as appropriate.

96i I/O and I/O Setup Guidelines

The 96i I/O only supports analog and digital

switching for channels 1–2, from within the

Hardware Setup and I/O Setup dialogs. The

96i I/O does not support path remapping within

I/O Setup.

Chapter 3: Installing and Conﬁguring the 96i