Epson ActionLaser 1000 Setup Manual - Halaman 8
Jelajahi secara online atau unduh pdf Setup Manual untuk Printer Epson ActionLaser 1000. Epson ActionLaser 1000 18 halaman. Imaging cartridge replacement procedure
Juga untuk Epson ActionLaser 1000: Pengiriman Kertas dan Kertas (11 halaman), Panduan Instalasi (7 halaman), Buletin Dukungan Produk (8 halaman)
Halaman Cetak
4
Attaching the power cord
1. Make sure the power switch at the top right of the printer is
turned off.
2. Insert the power cord into the back of the printer. Then plug
the other end into a properly grounded outlet.
Test printing
1.
Make sure the imaging cartridge is installed. Turn on the
printer. Several messages appear as the printer performs
internal tests. After about 35 seconds, the
appears.
Press the LEVEL 2 button to enter SelecType Level 2.
2.
Press
3.
4.
Press ) twice holding down the button until the display
begins to flash to print the feature print.
5.
After the feature print is complete, press the EXIT button to
exit SelecType.
until
FEATURE PRINT
READY
appears on the display.
message