Epson ActionLaser 1400 Baca Panduan Pertama Ini - Halaman 5
Jelajahi secara online atau unduh pdf Baca Panduan Pertama Ini untuk Printer Epson ActionLaser 1400. Epson ActionLaser 1400 27 halaman. Flatbed inkjet printer
Juga untuk Epson ActionLaser 1400: Panduan Pengguna (8 halaman), Panduan Pengguna (30 halaman)
Halaman Cetak
2 Unpacking
1. Remove the printer and accessories from the shipping carton.
2. Set the printer on a flat, stable surface. Leave adequate room
to provide ventilation. Allow approximately 9 inches
(230 mm) above the printer to be able to fully extend the
paper trays and load paper.
3. Take the packaging off the printer and the other items and
store in case you need to later ship the printer. It should
always be transported in its original packaging or the
equivalent.
Note:
The printer weights about 11 lb (5 kg) and should be lifted with
care.
4. Open the paper (1) and exit (2) trays at the top of the printer
and remove the shipping spacer from the center of the
feeder (3).
5. Close the paper and exit trays.
2
Setup