DigiDesign AI16 Panduan Memulai Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem I/O DigiDesign AI16. DigiDesign AI16 12 halaman. Analog input card for mix rack

Halaman Cetak
Completing and Confirming
Installation
To complete and confirm installation:
Reattach the Mix Rack's front panel.
1
Reconnect the power and any audio cables to the Mix Rack.
2
Turn on the system.
3
Go to the Options page and click the Devices tab to view
4
your system hardware status. The newly installed AI16 Card
should be displayed.
If the AI16 Card does not appear in the Mix Rack graphic,
check the ribbon cable connection. Disconnect and recon-
nect the ribbon cable to the Card, making sure to properly
seat the connector in its socket.
Detail of Devices tab indicating presence of three AI16 Cards
In the standalone software, right-click the Mix Rack graphic
5
to see your Mix Rack's Input and Output Card configuration.
AI16 Cards appear in slots A, B, and C of the pop-up menu as
"Analog Input Card".
Detail of standalone software's Devices tab pop-up menu showing AI16
Cards
Go to the Patchbay page and click the Stage tab to verify
6
that the AI16 Card appears in the patchbay.
Chapter 2: Installing the AI16 Card 5