DiGidot PXLNET Manual - Halaman 15

Jelajahi secara online atau unduh pdf Manual untuk Pemancar DiGidot PXLNET. DiGidot PXLNET 17 halaman.

TIPS & TROUBLESHOOTING

In case you run into any trouble, please check your setup according to following checklist.

1. Double check all cables and connections.

2. Double check any soldered connections

3. Double check Network cable pinout and crimped connectors

4. Is the DiGidot C4 powered correctly?

5. Are the LEDs powered correctly?

6. Are all power supplies connected correctly to your mains power supply?

7. Is your network setup done correctly?

‣ Prevent IP Address conﬂicts

‣ Make sure that the subnet mask is set correctly and that all IP Address are set within the

appropriate range.

‣ Refer to further trouble shooting tips in the DiGidot C4 user manual.

8. Are the DiGidot C4 inputs and outputs conﬁgured correctly?

‣ Make sure that the correct IC/SPI protocol is conﬁgured.

‣ Make sure that input and output matches the system setup.

Use the highlight option to test the outputs.

9. Double check if all grounds (DC-) from all power supplies that are connected to all lighting

products which are controlled from one DiGidot C4 and PxLNet Transmitter, are connected.

For technical speciﬁcations, latest documentation, manuals, product information and further support

please visit www.digidot.eu.

We've put great care in writing this manual. However in case you encounter any discrepancies or

unclarities, please contact us.

PxLNet Transmitter (20342) Manual

Version 1.8 - November 2021 |

15 17