Axxon LF755KB Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kartu PCI Axxon LF755KB. Axxon LF755KB 19 halaman.

Installation Guide for Axxon LF755KB PCI Express (PCIe) 4 Port RS422 SMPTE I/O Card (Low/Standard Height Mounting)

The options available through the configuration program are copied below.

LF755KB SMPTE 4 Port RS422 PCI Express I/O Card EE Configurator for DOS v0.2

============================================================================

Motherboard PCI Bios Present Status : Found & supported!

------------------

Configuration Menu

------------------

1. Change Port # 1 to be a Master (DTE / Controller)

2. Change Port # 1 to be a Slave

3. Change Port # 2 to be a Master (DTE / Controller)

4. Change Port # 2 to be a Slave

5. Change Port # 3 to be a Master (DTE / Controller)

6. Change Port # 3 to be a Slave

7. Change Port # 4 to be a Master (DTE / Controller)

8. Change Port # 4 to be a Slave

9. Change all Ports 1 -> 4 to be Master (DTE / Controller)

A. Change all Ports 1 -> 4 to be Slave

Q. Quit

The configuration parameters are non-volatile and therefore will remain active even

during a power off of the host system.

Please note the following relationship on the onboard LED to external cable mapping.

Port 0 LED is associated with the DB9F connector 1 on the cable assembly. This is Port # 1 in the configuration s/w.

Port 1 LED is associated with the DB9F connector 2 on the cable assembly. This is Port # 2 in the configuration s/w.

Port 2 LED is associated with the DB9F connector 3 on the cable assembly. This is Port # 3 in the configuration s/w.

Port 3 LED is associated with the DB9F connector 4 on the cable assembly. This is Port # 4 in the configuration s/w.

Axxon Computer Corporation

V1.0

(DCE / Emulator)