ArcFamily ArcEquine Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Medis ArcFamily ArcEquine. ArcFamily ArcEquine 16 halaman.

Halaman Cetak

Selecting Treatment Option

First choose the Treatment Option you wish

to deliver (see guide on page 7).

If you are not treating a speciﬁc condition

but using ArcEquine as part of a prevention/

maintenance regime, we recommend that

you ﬁrst go through the Treatment Protocol

as detailed in Question 1 (page 6).

Programming the Unit

At the top of the Unit there are four

Treatment Option indicator LEDs.

To select your Treatment Option,

press the left-hand button, and cycle

through the LED's until the chosen

Treatment Option is illuminated.

As the Treatment Option is selected you will

hear a sequence of short, sharp beeps. The

number of beeps indicates the Treatment

Option selected.

For example; three beeps = Option 3.

If the Unit has already been used, the red

LED will indicate the last Treatment Option

delivered.

Activating the Option

Once the desired Treatment Option has

been selected:

A. Press the right-hand button once.

There will be an audible "beep" and

the Unit will begin delivery of a 3

hour Treatment Option (recommended

Treatment for horses).

B. Press AND HOLD the right-hand

button until there is a long audible

"beep". This will begin delivery of a

7 hour Treatment Option.

Once activated, the left-hand button

will turn off and the right-hand button and

Option indicator will turn either:

Green:

To indicate complete connectivity

Red:

To indicate no connectivity at one

or more of the carbon rubber ArcPads

After 30 seconds the right-hand button

will turn off and the Option indicator LED

will begin to ﬂash and continue to do so

throughout the delivery period.