Epson C11C640001 - LX 300+II B/W Dot-matrix Printer Panduan Pengguna - Halaman 34
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Epson C11C640001 - LX 300+II B/W Dot-matrix Printer. Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 50 halaman. Epson lx-300: user guide
Juga untuk Epson C11C640001 - LX 300+II B/W Dot-matrix Printer: Manual (17 halaman)
Halaman Cetak
3 LF/FF button
❏
Feeds paper line by line when pressed and released.
❏
Ejects a single sheet or advances continuous paper to the next
top-of-form position when held down.
❏
In Micro Adjust mode, adjusts the top-of-form and tear-off position.
4 Load/Eject button
❏
Loads a single sheet of paper.
❏
Ejects a single sheet of paper.
❏
Loads continuous paper from the standby position.
❏
Feeds continuous paper backward to the standby position.
❏
In Micro Adjust mode, adjusts the top-of-form and tear-off position.
5 Pause button
Stops printing temporarily, and resumes printing when pressed again.
When held down for three seconds, turns on Micro Adjust mode. To turn
it off, press it again.
6 Paper Out light
❏
On when no paper is loaded in the selected paper source or when
paper is not loaded correctly.
❏
Flashes when paper has not been fully ejected or if paper is jammed
in the printer.
7 Pause light
❏
On when the printer is paused.
❏
Flashes when the printer is in Micro Adjust mode.
❏
Flashes when the print head has overheated.
34
Using the Control Panel