Aybey Elektronik ALYA Series Panduan Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Kontrol Aybey Elektronik ALYA Series. Aybey Elektronik ALYA Series 8 halaman. Serial communication lop
Halaman Cetak
6. In order to completed the mechanical installation of the lop, the back
cover is fixed to the wall using M4x35 screws and electrical connections
are made.
7. After the settings related to the configuration are complete, close the
front cover.
Chapter 3: Electrical Connections
1. Canbus cables of LOPs are connected to the related terminals inside the
control panel. (100-1000-CL-CH).
2. Cable from the control panel are connected to the nearest LOP through
hole as shown figure 1 E.
3. As shown in Figure 3, it is continued to be applied in a way that each LOP
is connected in series with the LOP of the next floor.
4. If there is no other CANBus serial communication unit to be connected to
the end of the line after the last LOP, a termination resistor is connected
to the white rectangular socket of the LOP.
F/7.5.5.02.127 R:0
Figure 3: Electrical Connection Diagram
4
ALYA