Epson C382011B - Stylus Pro 7500 Color Inkjet Printer Informasi Produk - Halaman 12

Jelajahi secara online atau unduh pdf Informasi Produk untuk Printer Epson C382011B - Stylus Pro 7500 Color Inkjet Printer. Epson C382011B - Stylus Pro 7500 Color Inkjet Printer 13 halaman. Epson stylus pro 7000: product information
Juga untuk Epson C382011B - Stylus Pro 7500 Color Inkjet Printer: Spesifikasi (4 halaman), Garansi (8 halaman)

Epson C382011B - Stylus Pro 7500 Color Inkjet Printer Informasi Produk
EPSON Stylus Pro 7000 series
6. If you're using the stand, remove the wing screws and
washers from the left and right sides, and keep them in a
safe place.
7. Have two or more people lift the printer off the stand, using
the hand grips.
Warning:
The printer weighs approximately 96 lb (43.5 kg). Always have
two or more people lift it, using the hand grip areas.
8. Keep the printer level while you move it.
Setting Up the Printer After
Transporting It
Setting up the printer after transporting it is almost identical
to setting it up for the first time. Whenever you set up the
printer, see the Assembly and Setup Instructions, and note the
following:
EPSON recommends installing new cartridges after
transporting the printer. Because of the ink charging process,
you will not be able to save ink by reinstalling used cartridges.
12 - EPSON Stylus Pro 7000 series

Moving the Printer on the Stand

When you want to transport the printer a short distance, such
as within the same building or facility, you can roll the printer
on its casters.
Caution:
Do not roll the printer on angled or uneven surfaces.
1. Make sure that the power cord, interface cable, roll paper
spindles and sheet media are removed, and the roll paper
cover and lower cover are closed. You don't need to remove
the ink cartridges.
2. Release the front casters and retract the stabilizer knobs.
3. Carefully roll the printer to its new location. Relock the
casters and extend the stabilizer knobs after moving.
After you move the printer, you may need to run a cleaning
cycle and realign the print head to maintain print quality.

Related Documentation

CPD-10836
EPSON Stylus Pro 7000 series Printer
Guide
CPD-10837
EPSON Stylus Pro 7000 series Quick
Reference Guide
4011817
EPSON Stylus Pro 7000 Assembly
and Setup Instructions
4012672
EPSON Stylus Pro 7500 Assembly
and Setup Instructions
8/00