ARCHIPELAGO LIGHTING planoARCH LBLP quinceARCH Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Pencahayaan ARCHIPELAGO LIGHTING planoARCH LBLP quinceARCH. ARCHIPELAGO LIGHTING planoARCH LBLP quinceARCH 2 halaman.

Halaman Cetak

Ⓐ

LBLP | quince

RCH

- Please read the product specification carefully first to confirm

that the working environment is in line with the condition on the

specification before it is used.

- Please confirm the input voltage and frequency before use.

- The light must be installed by professional personnel

- If the power cord and case of the products are damaged, it will be

regarded as disqualified product and should not be used.

- If the external soft cable or wire of the product is damaged, the

wire should be replaced by the manufacturer or service agent or,

personnel with similar qualifications to avoid danger.

1. Fix the suspension wire fixer

on the ceiling

Drill a hole with 6mm

diameter drill bit

Ceiling

Fix screw

Suspension wire fixer

1. Cut off the power supply before installation.

2. Ensure that the installed object can bear

the fixture weight.

Headquarters: 4615 State Street, Montclair, CA 91763

Production Center: 7345 Sycamore Canyon Blvd, Riverside, CA 92508

- Installation Guide

Please read all the instructions before attempting installation

Suspended Installation

2. Fix the suspension wire on the ceiling

Inflatable Colloidal

particle

Lay-in Installation

3. Open the groove on the ceiling according

to corresponding size. Then install the lamp

into the clamping groove on the ceiling.

- This luminaire is designed to operate in ambient temperatures ranging

from -10°F to 125°F and to be horizontally mounted facing down.

- This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and operation

of the product and the hazards involved.

- This product is not available for several special environments, such as

places with corrosive gas liquids or high pressure water vapor.

- CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE CORRECT

BRANCH CIRCUIT CONDUCTOR

- CAUTION - RISK OF FIRE

3. Connect LED panel light by the

hook of suspension wire

Rotary fixing

Adjust the length

of suspension wire

Suspension

wire

4. Then connect wire attached to the

light onto the corresponding power cord

and carry out insulation sealing at the joint.

LED panel

light

LED driver box

archipelagolighting.com

+1(866) 912-3220