CREE LIGHTING Cadiant Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Pencahayaan CREE LIGHTING Cadiant. CREE LIGHTING Cadiant 20 halaman. Dynamic skylight

Halaman Cetak

CREE LIGHTING Cadiant Panduan Memulai Cepat

commissioning. You'll need a line of sight to the device

commissioning.

to properly commission it with the Configuration Tool. The

SWG-WiFi may be attached to the ceiling grid, installed

above the ceiling, or wall-mounted.

3 3

Locate the SSID number and password for the

® ®

SmartCast

Wireless Gateway. Please ensure

Wireless Gateway.

the installer records the SSID and password from the

sticker on the back of the device prior to installation.

(Note: if the SSID and password were not recorded at

the time of installation you will need to capture that

information from the back of the device before

continuing.)

(Note: if this label is not present on the SmartCast

Wireless Gateway, use the information on the

Manufacturer's label. The alphanumeric code below the

bar code is the MAC address of the SmartCast Wireless

Gateway. Remove the colons and make all letters

lowercase to convert the MAC address to the unit

password.)

4 4

Device Status

When you begin, make sure:

Lights are ON

ON and not set up or commissioned.

Touchscreen tablet is ON

Started"

SmartCast® Wireless Gateway is on. Center LED is

blue and flashing in a two-blink pattern.

STEP 1: SET UP THE SMARTCAST NETWORK

ON, reading "Welcome - Get

"Welcome - Get