Architectural Area Lighting LC4 Panduan Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Lampu luar ruangan Architectural Area Lighting LC4. Architectural Area Lighting LC4 16 halaman.

Halaman Cetak

INSTALLATION INSTRUCTIONS

6.00"

3.25"

1.079"

8.50"

3.03"

5.375"

2.046"

3.75"

BALLAST HOUSING MOUNTING

DETAIL ORIENTATION

MOUNTING SURFACE

SEE NOTE #4 & #12 THRU #15

WIRE CONNECTORS

(BY OTHERS)

J-BOX (BY OTHERS)

16555 East Gale Avenue

City of Industry, CA 91745

(626)968-5666

WALL MOUNT STRAIGHT ARMS

FIXTURE INSTALLATION

(4)

0.531"

1) DRILL BOLT HOLES AND WIREWAY IN ACCORD TO

THE SUPPLIED MOUNTING TEMPLATE.

2) TURN OFF POWER.

3.54"

3) ADJUST FIXTURE HEAD TO THE DESIRE POSITION

AND SECURE WITH (2) BUTTON HEAD SCREWS.

4) LOOSEN BOTH SCREWS LOCATED BELOW BALLAST HOUSING.

WIREWAY

ALLOW DOOR TO HANG DOWNWARD. DISCONNECT WIRE

HARNESS BETWEEN BALLAST AND FLEXIBLE CONDUIT.

REMOVE BALLAST TRAY.

1.03"

5) SECURE BALLAST HOUSING TO MOUNTING SURFACE

WITH APPROPRIATE HARDWARE (SUPPLIED BY OTHERS).

6) RE-INSTALL BALLAST TRAY AND CONNECT WIRE HARNESS.

7) MAKE WIRE CONNECTIONS FROM BALLAST HOUSING

TO INCOMING LINES FROM WALL. (NOTE: ASSEMBLY MUST BE

GROUNDED TO INCOMING EQUIPMENT GROUND SUPPLY).

8) SECURE DOOR TO HOUSING BY TIGHTENING BOTH SCREWS.

9) APPLY CONTINUOUS BEAD OF SILICONE SEALANT ALL

AROUND BALLAST HOUSING AND MOUNTING SURFACE.

(SILICONE SUPPLIED BY OTHERS).

LAMP INSTALLATION

10) TO INSTALL LAMP, INSERT FINGERS INTO SLOTS

AND PULL BOTH LATCHES BACK SIMULTANEOUSLY.

11) OPEN THE BOTTOM HALF HOUSING AND INSTALL PROPER

LAMP (BY OTHERS). CLOSE BOTTOM HALF HOUSING, MAKE

SURE THE LATCHES SNAP BACK TO ITS ORIGINAL POSITION.

(2) BUTTON

HEAD SCREWS

BOLTS & WASHERS

SUPPLIED BY OTHERS

SERVICING BALLAST

12) DISCONNECT ALL POWER .

13) LOOSEN BOTH SCREWS LOCATED BELOW BALLAST

HOUSING. ALLOW DOOR TO HANG DOWNWARD.

14) SERVICE BALLAST AS NEEDED.

15) CLOSE BALLAST TRAY AND SECURE ON THE

HOUSING WITH (2) SCREWS.

CATALOG NUMBER

WVSS / WSS / WLS

FIXTURE HEAD

SEE NOTE #10 & #11

DATE

APPRVD

PART NO.

DATE

REV.

04/14/2008

A96266