CREE LIGHTING C-LITE C-WR-B-WLIN4-SCCT Series Panduan Petunjuk Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Perlengkapan Lampu CREE LIGHTING C-LITE C-WR-B-WLIN4-SCCT Series. CREE LIGHTING C-LITE C-WR-B-WLIN4-SCCT Series 19 halaman.
Halaman CetakINSTALLATION INSTRUCTIONS
C-WR-B-WLIN4-SCCT LED Series
NOTE: The emergency driver and AC driver must be fed
from the same branch circuit.
Make the following Electrical Connections:
STEP 1: (Connecting the Occupancy Sensor)
a. Connect the black fixture lead labeled switched
hot to the red lead from the occupancy sensor.
b. Connect the violet fixture lead to the violet lead
from the occupancy sensor.
c. Connect the grey or pink fixture lead to the grey or
pink lead from the occupancy sensor.
STEP 2:
a. Connect the black fixture lead labeled unswitched
hot to the unswitched voltage supply lead.
b. Connect the black lead from the occupancy sensor
to the switched voltage supply lead.
c. Connect the white fixture lead and the white lead
from the occupancy sensor to the neutral supply
lead (Hot 2 for 208/240V wiring).
d. Connect the bare or green ground fixture lead to
the supply ground lead.
Tuck all wires carefully into wiring chamber ensuring that
no wires are pinched.
ELECTRICAL CONNECTIONS-
Emergency Driver and Occupancy Sensor
http://lighting.cree.com/warranty
Document:
LPN00601X0001A2_A
Created By:
TMT
LINE SWITCHED
LINE- UNSWITCHED
NEUTRAL OR HOT 2
GROUND
|
866.924.3645
Date:
7-26-2021
LUMINAIRE
OCCUPANCY SENSOR
LINE - BLACK
RED
WHITE
VIOLET
GREY OR PINK
LINE - BLACK
UNSWITCHED
LINE - BLACK
SWITCHED
NEUTRAL - WHITE
VIOLET
GREY OR PINK
BARE OR
GREEN