CREE LIGHTING Stylus Series Panduan Petunjuk Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Lampu Kerja CREE LIGHTING Stylus Series. CREE LIGHTING Stylus Series 8 halaman.

Halaman Cetak

FCC NOTICE

CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

CAN ICES-005 (A)/NMB-005 (A)

SECTION 5:

ELECTRICAL CONNECTIONS

STEP 1:

For 120/277/347V applications make the following Electrical

Connections:

a. Connect the black luminaire lead to the supply lead.

b. Connect the white luminaire lead to the neutral

supply lead.

c. Connect the green or green/yellow ground lead to

the green supply lead.

For 208/240V applications, make the following Electrical

Connections:

a. Connect Hot 1 supply lead to the black lead.

b. Connect Hot 2 supply lead to the white lead

c. Connect the green or green/yellow ground lead to

the supply ground lead.

STEP 2:

a. If Dimming is an option; connect the violet dimming

positive lead to the supply dimming positive lead. If

dimming is not being used, ensure to cap off the violet

lead.

b. If Dimming is an option; connect the grey dimming

negative lead to the supply dimming negative lead. If

dimming is not being used, ensure to cap off the grey

lead.

is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree

registered trademarks of Cree, Inc.

8 of 8

LINE OR HOT 1

GREEN

NEUTRAL OR HOT 2

DIM (+) VIOLET

DIM (-) GREY

and the Cree logo are

LUMINAIRE

LINE-BLACK

GROUND-GREEN

NEUTRAL-WHITE

VIOLET

GREY

www.creelighting.com

LPN00644X0007A0_A