Aygunfly Maki Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Aygunfly Maki. Aygunfly Maki 12 halaman.

7.Inserting the reserve parachute into the harness

Insert the reserve parachute into the pocket of the harness, so that the handle is

visible and facing outwards, and the loop connecting the handle to the deployment

bag is facing upwards.Thread a thin cord through each elastic loop. This will help

close the pocket. Thread the elastic loops into the smallest of the eyelets on the

pocket flaps. Close the flaps following the order shown in the photographs below.

Push the metal pins on the handle into the elastic loops and under the transparent

cover. It is essential to remove the cords after this operation. The cords should be

pulled out slowly in order not to damage the elastic loops by excessive friction. Lastly,

the handle should be positioned under the elastic cover.

Secure one of the pins with a thread which has a predetermined breaking point. This

thread ruptures at a load of 5 kg.

IMPORTANT:

Every new combination of reserve parachute and harness or the external container

assembled for the first time should be tested by an official harness or reserve

parachute dealer, or by a flying instructor. Deployment of the reserve parachute

should be perfectly feasible from the normal flying position.

[5]