ARCHITETTURA SONORA ICARUS SUB Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembicara ARCHITETTURA SONORA ICARUS SUB. ARCHITETTURA SONORA ICARUS SUB 2 halaman.

Cabling:

Icarus_sub is shipped from the factory with a high performance plug/socket connector (IP68, IP69K) already attached.

The plug (male ended) is connected to the cable of the sound module and the socket (female ended) will have to be connected to the cable

going to the ampli er during nal installation.

Please keep to the following instruction to connect the socket (female ended) to your cable:

- disassemble the socket as in the image below:

Disassembled socket (female ended)

- connect the positive wire (+) into the hole labelled 1 (take the little pin next to the hole as a reference).

- connect the negative wire (-) into the hole labelled 2.

Quick push-pull connection and disconnection:

To connect

1. Push the plug connector into the socket connector untill fully seated

2. A noise is the proof of correct matching

3. Apply gentle traction between plug and socket to ensure they are well hooked

4. To disconnect simply press the release button and pull.

Maintenance and care:

plug (male ended)

already connected

Brown >

White >

or Blue

plug (male ended)

already connected

to keep your speakers beautiful as long as possible, we warmly recommend doing maintenance at

least once a year. When not in use, sound modules should be appropriately covered or stored

away; heavy duty protective covers are available from AS.

Please refer to the General Manual for appropriate instructions and note that any departure from

our recommendations on care and cleaning, or any evidence of misuse or damages from ordinary

wear and tear, will void all warranty claims.

socket (female ended)

to be connected

Brown >

White >

or Blue

socket (female ended)

to be connected

To disconnect

Speci cation could be changed without notice

ampli er

with DSP

Last update: February 2020