Digifly DU8 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Digifly DU8. Digifly DU8 11 halaman. Display unit 8 instrumentation

3.1.1 - Altimeters.

This function allows the commutation of the displayed altimeter (QNE or

QNH or QFE): it is activated by pressing ZOOM IN.

When you enter this mode the window (2) of the altimeter is high lighted;

with UP ARROW and DOWN ARROW keys it is possible to change the

reference pressure (by pressing for a very short time the variation,

indicated by a beep, is a 1/10 of Millibar or relative inches of Hg).

If QFE is evidenced you zero the altitude by pressing CLEAR.

By pressing LEFT ARROW and RIGHT ARROW you change the

indication of altitude.

Press ZOOM IN or ZOOM OUT to exit.

3.1.2 - Recorder.

It records flight data between two time intervals.To activate the recording

press UP ARROW and a blinking "R" will appear (12) on the upper left-

hand corner of the screen.

If you push ENTER within 5 seconds, the recording is activated, if not,

the recorder will not start working.

To stop the recording press DOWN ARROW and ENTER within 5 seconds.

The recording is automatically interrupted when the maximum recording

time is exceeded.

The maximum recording time is related to the Sampling rate, that is the

frequency of recording of the instrument ( from 1 to 50 secs ).

This frequency is presettable in the Set Up.

When you activate the recorder the previous recorded flight will be

completely deleted.

User Manual

3.1.3 - Switching the central window.

By pressing the ZOOM OUT key the central window switches from GPS

data to secondary instruments and viceversa.

3.2 - Functions menu.

Press MENU to enter it. Press key DOWN ARROW or UP ARROW to

select the submenu.

After selecting a submenu, press RIGHT ARROW to enter it.

Press MENU to exit.

3.3 - Replay.

User Manual