Creek Audio CD43 mk 2 Panduan Petunjuk Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar CD Creek Audio CD43 mk 2. Creek Audio CD43 mk 2 17 halaman. Creek audio cd player operating instructions cd43 mk 2

Halaman Cetak
playing from the beginning of the first track.
You may also go straight to a specific track
by using one of the SKIP buttons
. In this case the disc will start playing
the selected track when the P LAY button is
pressed. The numeric keys on the remote
handset allow direct access to the desired
track.
7. At the end of the last track the CD will
return to a waiting mode.
NOTES:
u If the CD is deeply scratched or too dirty,
disc play may not start. If an improperly
centered disc is played, noise will be heard
in the mechanism. Avoid using such discs.
u Some discs of poor manufacture may not be
readable or may skip, check another disc
should this occur.
u Some discs will take a long time to read the
TOC if they have a lot of tracks, i.e. more
than 20.
O P E R ATION
STA N D B Y
When switching on from Standby, if there is
no disc in the CD43 mk2, the display will
show no dISC.
If there is a disc in the CD43 mk2, the
track display will show dISC until the TOC
(table of contents) has been read.
When the TOC has been read, the CD43
will display the information, i.e. the total
number of tracks and total playing time.
CD43 mk2
or

INSERTING A DISC

Press the OPEN/CLOSE button on the
front panel or DISC on the handset, the
disc tray will open and the O P E N sign will
be displayed.
Insert
OPEN/CLOSE or DISC button again to
close the tray.
The disc will start spinning and the total
number of tracks will be read. The disc will
then stop and the display will show the
TOC (table of contents), being the total
number of tracks and the total playing
time.

TO PLAY A DISC

Press the PLAY button. The disc will start
playing.
The track number 1 will be displayed,
together with the P L AY
the elapsed time of the track being played.
The calendar will show the total number of
tracks on the disc and the symbol for track
will start flashing.
1
TO '
STOP
Compact Disc Player
the
disc
and
DISC PLAY
press
the
symbol and
9