Creek Company ODC XR 12 Manual Petunjuk Perakitan - Halaman 3

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perahu Creek Company ODC XR 12. Creek Company ODC XR 12 6 halaman.

Halaman Cetak

IV. ATTACH PONTOONS TO FRAME

NOTE: Always inflate the Pontoons first, before attaching to frame.

1. Position inflated Pontoons under the Left and Right Frame Members with ODC XR 12 logo oriented to the outside.

The valve covers at top of Pontoon should fit between the Front Fishing Frame and the Rear Rowing Frame (see figure 3).

2. Attach each Pontoon to frame using (8) Cam Lock Straps. Slip each strap through D-Ring on Pontoon, around frame and pull

tight through Cam Lock Buckle. NOTE: Be sure the straps are pulled tight through the Cam Lock Buckles (see figure 3).

Frame only on the Pontoons, leaving the Front Fishing Frame detached.

IIIa.

ONE MAN CONVERSION:

V. OAR & OARLOCK ASSEMBLY

1. Slide the Oar Stop over the handle end of the Oar Shaft.

2. Assemble 2 oar shaft pieces and blades.

3. Place Oarlock Bushing over Oarlock shaft and place Oarlock into frame. Frame has 3 Oarlock postions for a custom fit. Attach

split ring at end of Oarlock shaft to secure Oarlock in place. (see figure 7)

4. With Oarlocks installed on the Frame, slide Oars into Oarlocks starting at blade end of Oar. The Oars should be

adjusted equally left and right allowing at least two thumbs distance between the Oars to avoid pinching your thumbs when rowing.

Tighten the Oar Stops in place.

Figure 1

Front Fishing Frame

Assembly

A. Standing Platform

B. Leaning Bar

C. Right Frame Member

D. Left Frame Member

E Seat Support Frame Member

F. Long U-Bar

Detail Of

Snap Pin

Installation

Figure 5

Underneath

View of

Underseat Lift

and Lock

Anchor System

Designed to be

used while

sitting in rowers

seat.

Your ODC XR 12 can be converted to a one man craft by centering the Rear Rowing

Left Pontoon

Right Pontoon

To Front of Boat

Underneath View of Boat

FRONT FISHING FRAME

Anchor Rope

(not Included)

Anchor Line

Pulley

Cargo

(not Included)

Deck

To Back of Boat

Figure 4

Connecting

Frames

to Anchor