Cremesso CAFFE Latte Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat Kopi Cremesso CAFFE Latte. Cremesso CAFFE Latte 20 halaman.

Making coffee/tea

Your first cup of coffee or tea!

Each cup requires one cremesso

capsule. Other capsules will not

work. Vent the piping after long

pauses ➔ p. 26.

Good to know

The coffee/tea key flashes white after pressing if heating up is still in progress. Output starts

when it stays white.

Tip: use thick preheated cups for Ristretto and Espresso to keep your coffee warm. Preheat

cup: fill Ristretto

(without capsule) in cup.

Vent piping: after long pauses (e.g. vacations) the piping will contain air (➔ page 26 «Flush

and vent machine and piping»).

Before changing between coffee and tea: Without capsule, press cleaning key

to flush out piping (➔ page 26 «Flush and vent machine and piping»).

Cup: place under the output. For

large cups slide drip tray to the

left.

Tip: You can still make coffee

when the milk tank is not inserted

Load capsule: 1. Push lever right

back. 2. Let capsule fall squarely

into chute. 3. Pull lever right for-

ward (to puncture capsule)

Output quantities can be individually adjusted (➔ pages 19/20 «Coffee-/Milk output program-

ming»).

Important:

– Beware of hot coffee/tea: danger of scalding!

– Coffee/tea output is only possible with closed operating lever

Coffee/tea output: Small

medium

or large cup

Output stops automatically when full

(or press key again to stop before).

Eject capsule afterwards ➔ p. 16