Cremesso SMART BRAVA Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat Kopi Cremesso SMART BRAVA. Cremesso SMART BRAVA 20 halaman.
Halaman Cetak
Flush out piping
Place a cup under the output.
X
Press the cleaning key .
X
The flushing process starts.
50 ml of water is used per flushing
cycle.
On completion of the flushing
process the machine will switch to
ready mode.
When starting up for the first
X
time, repeat this process.
To end the flushing process
X
prematurely, press the cleaning
key again.
If the flushing process does not start:
Remove the water tank and re-insert.
X
Press the cleaning key .
X
Coffee preparation
One capsule is required for each cup
of coffee.
After long pauses, flush out the
X
piping.
Depending on the size of the cup,
adjust the cup tray:
Fold the cup tray forward.
X
Place a cup under the output.
X
10
Tips:
• Crema – The closer the cup is to
the outlet, the better the crema.
• Preheat the cup – Press the
espresso key (without capsule)
and fill the cup with water.
Load capsule
Push the operating lever upwards.
X
Drop the capsule into the
X
opening.
Push the operating lever
X
downwards.
The capsule is pierced.
Coffee output
Press the coffee key:
X
Espresso: medium cup (50 ml)
Lungo: large cup (110 ml)
Lungo grande: very large cup
(200 ml)
1.
2.