Crenova 6016A Panduan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Multimeter Crenova 6016A. Crenova 6016A 10 halaman. Clamp digital multimeter

Battery cover

Please follow steps below:

2-1.Turn off the clamp meter, and remove test lead or the clamped current conductor at input end;

2-2.Make panel face down, and unscrew battery cover, remove the battery cover and take the battery box

out;

2-3.Remove old batteries from the battery box and install new batteries according to polarity indication;

2-4.Please use batteries with the same model. Do not insert improper batteries;

2-5.After installing new batteries, put battery box inside the device, close the battery cover and secure the

screw.

Content in this manual is considered correct. If users find any errors or omissions, please contact

the manufacturer;

Please read the Safety note and Warning carefully, the company shall not be held liable for any

accidents or damages caused by user's wrong/improper operation.

Screw

Batteries

in battery box

Figure 7