Creo iQsmart 2 Adendum Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Adendum Panduan Pengguna untuk Pemindai Creo iQsmart 2. Creo iQsmart 2 16 halaman.

Functional description of the operating panel

The Power button with LED and the Status indicator with LED are located on

the operating panel.

The LED of the Power button indicates the Main power switch setting of the

scanner. The LED of the Status indicator indicates the status of the scanner.

NOTE: Each time you press the Power button, the scanner status toggles between on and off.

The following are the meanings of the LED of the Power button:

•

Off

•

Green

•

Red

The following are the meanings of the LED of the Status indicator:

•

Orange

•

Red

•

Blinking Red

•

Green

•

Blinking

Green

•

(Off)

NOTE: Do not open the Top door when the Status LED is blinking.

oXYgen Scanning Application - User Guide Addendum

Power is OFF.

Power is ON.

Power is OUTSIDE THE TOLERANCE RANGE.

Scanner is activated.

Hardware problem.

The interlock switches are open.

Scanner is idle.

The scanner is either working or firmware is not

updated. In the event that the firmware is not

updated, you must activate the application version.

When the Top door is open or the Base glass is not

in position.