Digikeijs DR4088CS Buku Petunjuk - Halaman 7
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Unit Kontrol Digikeijs DR4088CS. Digikeijs DR4088CS 12 halaman. Feedback module
Juga untuk Digikeijs DR4088CS: Buku Petunjuk (11 halaman), Manual (8 halaman), Buku Petunjuk (14 halaman), Buku Petunjuk (15 halaman)
Halaman Cetak
DR4088CS / GND / OPTO
3.2 Reset DR4088xx
Important!
The DR4088xx The DR4088xx has no function for resetting to factory settings!
Since no settings or functions are stored in the feedback module, this is not necessary!
4.0 Connection examples
In this chapter you will find some connection examples for the DR4088xx. Please note that we are not able to show all possibilities.
Important! DR4088GND 3-wire operation:
Due to the H-bridge (track output) in the DR50xx, feedback devices in the DR4088GND version must not be used against track ground, as is usu-
ally the case with 3-wire tracks. This inevitably leads to the destruction of the DR50xx.
If a 3-wire driver still wants to drive with the DR50xx and report back against track ground, the DR4088OPTO
can be used.
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
2021-08-11
P 7