Digikeijs DR4088RB-OPTO Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Unit Kontrol Digikeijs DR4088RB-OPTO. Digikeijs DR4088RB-OPTO 14 halaman.
Juga untuk Digikeijs DR4088RB-OPTO: Manual (8 halaman)
Halaman Cetak
DR4088RB-CS / OPTO
2.0 Product overview
2.1 General product information
The DR4088RB-xx is a feedback module that can be connected to the control panel via the R-Bus®.
The DR4088RB-xx has 16 feedback inputs.
The DR4088RB-xx is available as CS version (current sensor 2-wire track) and OPTO version (connection of reed contacts, 3-wire track signal to track ground).
2.2 Technical specifications
The connection terminals of the 16 feedback units are designed for a cross-section of 0.5mm², the two terminals for "C" are designed for a cross-section of
0.75mm².
Number of in-
puts
DR4088CS
2 x 8
DR4088OPTO
2 x 8
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
2021-07-06
Suitable
Minimum load for
for
safe reporting
2 conductors
2 mA
3 conductors
when using the
DR50xx
Max. load per
contact Load per
contact Load ca-
contact
2 A
-
-
Max. load per
Peak load for 8
feedbacks at "C"
pacity
total.
per contact for
max. 100 ms
5 A
6 A an „C"
-
Peak load for 8 feed-
backs at "C" total
6 A an
„C"
-
P 4