FIAM. 870 Informasi Produk - Halaman 6

Jelajahi secara online atau unduh pdf Informasi Produk untuk Perabotan Dalam Ruangan FIAM. 870. FIAM. 870 17 halaman.

LET ME SEE Console

Art. 870

Read this information carefully before using the product and keep it for

future reference. Failure to comply carefully with the instructions which

follow may put the safety of the product and its users at risk.

Product description and intended use

• Product description and composition

The LET ME SEE Console - Art. Code 870 is a Console intended as an item of indoor furniture. It is manufactured from curved

float plate glass. The LET ME SEE Console was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU),

Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it

• Intended use

The article known as LET ME SEE is designed and built to serve as a Console for indoor use and must therefore be used only for

this purpose and no other.

For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions

provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the

telephone numbers stated in this document.

• Transporting and storing the LET ME SEE Console in the original packaging

The LET ME SEE Console, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking.

It must be stored indoors in a dry place.

Place the LET ME SEE Console in the original packaging, in the horizontal position. The arrows on the label on the packaging must

be vertical and pointing upward.

Never place weights or loads in excess of 100 Kg on the original packaging, since exceeding this weight may cause the breakage

of the article.

The LET ME SEE Console in the original packaging weighs about 80 kg.

It must therefore be placed on surfaces capable of supporting its weight.

• Removing the packaging - assembly

To remove the original packaging of the LET ME SEE Console, proceed as follows.

a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.

b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may

damage the LET ME SEE Console.

c) Remove the LET ME SEE Console from its packaging. At least two people are required for this operation. Wear gloves which

assure a good grip on the float glass.

d) Fit the two parts of the Console together and secure the assembled product to the wall following the instructions provided below.

6/16