Digikeijs DR5033 Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanjang Digikeijs DR5033. Digikeijs DR5033 18 halaman. 3-ampere, h-bridge dcc booster
Juga untuk Digikeijs DR5033: Manual (10 halaman), Buku Petunjuk (18 halaman)
Halaman Cetak
DR5033 DIGIBOOST
2.0 product overview
2.1 General product informa on
The DR5033 is a pure DCC booster capable of Railcom®. All other protocols (e.g. Märklin® Mfx®) are not supported!
The DR5033 is an H-bridge booster with various connec2on op2ons (CDE booster connec2on, LocoNet® B, Roco® booster bus, track sniffer) to connect the
DR5033 to an exis2ng central. The configura2on of the DR5033 can be customized via LNCV programming. The DR5033 can be configured to switch the polarity
of the track output automa2cally or by magne2c command. The DR5033 can be switched on and off separately via a magne2c command and the current status
can be queried by the control panel.
Important!
The DR5033 must not be used in systems that operate according to the common ground principle. This can lead to the destruc2on of the booster
and/or the central unit.
2.2 Technical specifica ons
The terminals are designed for a cross-sec2on of 0.75mm².
DR5033
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
Stand 2019-10-14
outputs
loading capacity
Track Out
inputs
3A
LocoNet® B
Track Sniffer
Roco® Booster Bus
power supply
15-19V DC
3A
P 4