Creone KeEYBOX KEYRACK KEYWIN5 Panduan Instalasi - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kunci Creone KeEYBOX KEYRACK KEYWIN5. Creone KeEYBOX KEYRACK KEYWIN5 19 halaman.
Halaman Cetak
External Alarm
When connecting your KeyBox to an external alarm, you can make
sure that alarm signals generated by opening the KeyBox without a
correct PIN and when taking an intellipin without access are sent to
Data +
7
Data -
GND
12-15 V
C
NC
NO
1.
Connect the external alarm according to the diagram
above. INPUT 1 and NC close on alarm.
2.
When the alarm has been connected, log in to the configu-
ration menu on the cabinet with your service PIN, default
1234#. Navigate down to "Enable external alarm" and
change this to ON. See page 10 in these instructions.
3.
When you exit the configuration menu, the alarm has
another system for increased security. Naturally, these alarms are
also registered in KeyWIn5 software.
1
4
5
8
9
3
2
6
been acitvated. Now log in to your KeyWin5 software and
configure the alarm time via SETTINGS -> CABINETS. You
can find more information in the KeyWin5 manual.
10