Cres Cor H-339225-01 Petunjuk Pengoperasian dan Pemeliharaan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemeliharaan untuk Peralatan Makanan Komersial Cres Cor H-339225-01. Cres Cor H-339225-01 4 halaman. Insulated hand-lift cabinets
Halaman CetakInsulated
FL-0520-BE
Hand-lift Cabinets
Rev. 8 (5/13)
Page 2 of 4
OPERATING and MAINTENANCE INSTRUCTIONS
WARNING
BEFORE CLEANING CABINET:
1. Remove Power Cord from cabinet.
2. Do NOT hose cabinet with water.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh
chemicals.
HOW TO CLEAN UNIT:
CABINET
FINGERPRINTS,
GREASE OIL
WATER SPOTS
**Be sure your cleaner is good for stainless steel for use on cabinet body;
HOW TO ADJUST THE DOOR LATCH:
1. For vertical adjustment
(Up and down movement):
a. Loosen (2) screws located in magnetic
strike on cabinet.
b. Move strike up or down for alignment
to magnet on latch.
c. Tighten screws to secure
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
For INSULATED HAND-LIFT CABINETS
MODEL H-339225 and H339SS1814CBE
SOIL
Mild detergent* and hot water,
or mild abrasive cleaner.
DIRT
Steam (no strong alkaline
additive)
Detergent* and hot water.
Chemical oven cleaner.**
Mild abrasive cleaner.
Oily or waxy cleaner.
Mild abrasive cleaner.
* Mild detergents include soaps and non-abrasive cleaners
and for aluminum, for use on the rack insert (pan slides)
5925 Heisley Road • Mentor, OH 44060-1833
Hints:
1. Wipe up spills as soon as possible.
2. Clean cabinet regularly to avoid heavy dirt build-up.
3. Make a test spot with cleaner.
4. Follow manufacturer's directions on cleaner.
5. Do not mix cleaners
6. Avoid drips and splashes.
CLEANER
1. Use soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
1. Rinse after steam cleaning.
2. Wipe dry.
1. Wipe with soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
Follow oven cleaner manufacturer's
directions.
Apply with soft, clean cloth.
Wipe with damp cloth.
2. For horizontal adjustment
(Greater or lesser magnetic draw):
a. Loosen four (4) screws in latch on door.
b. Move latch forward or backward to
adjust magnetic draw.
c. Tighten screws to secure.
METHOD