Digilin Colour Touch VW Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Digilin Colour Touch VW. Digilin Colour Touch VW 11 halaman. Vw dmx controller fw 1.0

Halaman Cetak
Colour Touch VW - VW DMX Controller FW 1.0
User Manual
1.0 - 2 June 2021
Adjusting the DMX duplicates
The DMX duplicates is the amount of times the VW channels are repeated on the DMX512 output. For
example, a duplicate of three would create this signal sequence VWVWVW.
Once the Settings menu is enabled the DMX duplicates can be adjusted.
1.
Navigate to "Set" using left and right arrows
2.
Tap down twice to "Dup"
3.
Tap Right once and a value will appear onscreen. This is the current DMX Duplicate setting.
4.
Use the up and down arrows to edit the DMX duplicate.
5.
To exit tap left back to "Dup" sub menu.
6.
Then tap up twice to "set" to access main menu.
7.
Upon leaving the settings menu the control will save it to memory.
Adjusting the Power on State
The power on state controls what configuration to apply to the Colour Touch VW at power on. once the
setting menus is enabled, the power on state can be adjusted.
1.
Navigate to "Set" using left and right arrows.
2.
Tap down three times to "Pos".
3.
Tap Right once and a value will appear onscreen. This is the current Power on state setting.
4.
Use the up and down arrows to change the setting.
5.
To exit tap left back to "Pos" sub menu.
6.
Then tap up three times to "set" to access main menu.
7.
Upon leaving the settings menu the control will save it to memory.
Figure 3 shows the settings menu navigation.
digilin.com.au
+617 3899 1267
Figure 3: Settings Menu Navigation
Page 8 of 11