Digilock NEXT Sola3 Keypad Panduan Produk - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Produk untuk Kunci Digilock NEXT Sola3 Keypad. Digilock NEXT Sola3 Keypad 9 halaman. Key managed
Juga untuk Digilock NEXT Sola3 Keypad: Panduan Produk (5 halaman)
Halaman Cetak
Programming Instructions
Set Lock Functionality
Each lock can be set for either shared or assigned use functionality. Press = to check functionality. If in shared use, LED is red. If in
assigned use, LED is green.
1
To set for assigned use:
Press
=` 65 `
.
The red LED will fl ash.
Assign the User Credential (for assigned use functionality only)
Make sure that the lock is set for assigned use functionality (a green LED will fl ash when = is pressed). Once a user credential is assigned,
the previously assigned user credential will no longer operate the lock.
1a
Assign a User Code:
Default user code:
1 2 3 4
Press
= `
then insert a valid Manager Key.
The LED will turn on.
1a
Assign a User Key:
Press
= `
then insert a valid Manager Key.
The LED will turn on.
Product Guide
2
While the LED is fl ashing, insert
the Programming Key.
A two-tone beep will be heard
and the green LED will fl ash once.
1b
1b
Keypad
Key Managed
Shared & Assigned Use Functionality
1
To set for shared use:
Press
=` 56 `
.
The green LED will fl ash.
2a
Press
= [any 4-digit code] `
. A two-tone beep will be heard.
Press
= [the same 4-digit code] `
.
Two sets of two-tone beeps will be heard and the LED will turn off.
2
While the LED is on, insert a User Key.
A two-tone beep will be heard and the LED will turn off.
2
While the LED is fl ashing, insert
the Programming Key.
A two-tone beep will be heard
and the red LED will fl ash once.
2b
5